Nickel Alloy Waspaloy (SAE)
Weitere Informationen finden Sie hier.
Symbolbild
- These products have been used typically for parts, such as bolts and turbine blades, requiring high strength up to 1500°F (816°C) and oxidation resistance up to 1750°F (954°C), but usage is not limited to such applications.
- These products have been used typically for parts, such as cases, requiring high strength up to 1500°F (816°C) and oxidation resistance up to 1750°F (954°C), but usage is not limited to such applications.
- This tubing has been used typically for parts requiring high strength up to 816°C (1500°F) and oxidation resistance up to 954°C (1750°F), but usage is not limited to such applications.
- This wire has been used typically as filler metal for gas-tungsten-arc or gas-metal-arc welding of parts fabricated from precipitation-hardenable nickel alloys of similar composition, but usage is not limited to such applications.
- Used progressively as exhaust valve temperatures increase. The maximum service temperature for superalloys can be as high as 870 to 900°C (1600 to 1650°F) depending upon imposed stresses.
- Used typically for parts requiring high strength up to 816°C (1500°F) and oxidation resistance up to 954°C (1750°F), but usage is not limited to such applications.
- Used typically for parts, such as fasteners, flanges, and rings, requiring high strength up to 1500°F and oxidation resistance up to 954°C (1750°F), particularly those parts which are formed or welded and then heat treated to develop required properties, but usage is not limited to such applications.
- Used typically for parts, such as pins, nuts, and turbine blades, requiring high strength up to 816°C (1500°F) and oxidation resistance up to 954°C (1750°F), but usage is not limited to such applications.
- Used typically for rotating parts, such as compressor blades, discs, hubs, shafts, and spacers, requiring high strength up to 816°C (1500°F) and oxidation resistance up to 954°C (1750°F), but usage is not limited to such applications.
Physikalische Eigenschaften
Name | Wert | Messverfahren und -bedingungen |
---|---|---|
Dichte | 8.19 – 8.249 kg/dm³ | |
Mechanische Eigenschaften | ||
0,2-%-Streckgrenze bei Zugbeanspruchung | > 552 MPa | |
Zug-Elastizitätsmodul | 199.95 – 211 GPa | |
Zugdehnung beim Bruch | > 15 % | |
Zugfestigkeit | > 1000 MPa | |
Elektrische und magnetische Eigenschaften | ||
spezifischer elektrischer Widerstand | 1.191 – 1.243 Ω∙mm²/m | |
Thermische Eigenschaften | ||
Wärmeleitfähigkeit | 10.7 W/(m∙°C) |
Daten bereitgestellt von
Key to Metals AG
IBDT Ingenieurbüro Daniel Trost
+49 176 703 22 119
Anfrage per E-Mail
Webseite | Mehr Details | Zu den Materialien von Key to Metals AG
Ähnliche Materialien
Wählen Sie die Materialeigenschaften aus, anhand derer ähnliche Materialien identifiziert werden sollen. Durch Hinzufügen weiterer Eigenschaften sowie Anpassen der jeweiligen Abweichung lässt sich die Ergebnisliste beeinflussen. Hier wird eine Auswahl der ähnlichsten Materialien angezeigt. Um die gesamte Liste zu erhalten, drücken Sie auf die Schaltfläche "Vollständige Ergebnisliste anzeigen".