Key to Metals AG (Datenlieferant)

1010 (SAE)

Symbolbild

Kategorie Metalle > Eisenmetalle > Stähle > Bau- und Konstruktionsstähle

Einsatzbeispiele

Flat Rolled Products applies to Structural Shapes, Plates, Strips, Sheets and Welded Tubing; Long Products applies to Semi-Finished Products for Forging, Hot Rolled and Cold Finished Bars, Wire Rods and Seamless Tubing.
Hot-rolled carbon steel bars and heat treated carbon steel bars which are to be used in cold shaping, including cold extrusion, of ammunition components.
Low-carbon steel in the form of welded tubing, used typically for oil lines and other parts requiring high-quality tubing suitable for severe forming and for welding or brazing.
These products have been used typically for deep-drawn and formed parts requiring a steel of high ductility and where parts may require welding during fabrication, but usage is not limited to such applications.
These products have been used typically for drawn and formed parts requiring a steel of moderate ductility, but usage is not limited to such applications.
These products have been used typically for stamped parts and for parts requiring bending only normal to the direction of rolling, but usage is not limited to such applications.
Used in automobile panels, appliances and so on.
Used typically for deep drawn and formed parts requiring a steel of high ductility, but usage is not limited to such applications.
Used typically for oil lines and other parts requiring high-quality tubing suitable for severe forming and for welding or brazing, but usage is not limited to such applications.

Physikalische Eigenschaften

Name	Wert	Messverfahren und -bedingungen
Mechanische Eigenschaften

0,2-%-Streckgrenze bei Zugbeanspruchung	> 180 MPa
Zugdehnung beim Bruch	> 20 %
Zugfestigkeit	320 – 653.3 MPa

Key to Metals AG

IBDT Ingenieurbüro Daniel Trost
+49 176 703 22 119
Anfrage per E-Mail