VMQ 70.72-01 (FEP-O-SEAL) (Vinyl methyl silicone elastomer)
Symbolbild
- Abkürzung: VMQ
Physikalische Eigenschaften
Name | Wert | Sollbereich | Bemerkung | Messverfahren und -bedingungen |
---|---|---|---|---|
Dichte | 1.4 g/cm³ | 1.1 – 1.7 g/cm³ | ASTM D 297 | |
relative Dichte | 2.15 | ASTM D 792, FEP Cover properties | ||
Mechanische Eigenschaften | ||||
Druckverformungsrest | 15 % | ASTM D 395, 22 h, 170 °C | ||
Gleitreibungskoeffizient | 0.2 | FEP Cover properties | ||
Shore-Härte (A) | 70 Shore A | 65 – 75 Shore A | ASTM 2240 | |
Shore-Härte (D) | 55 Shore D | ASTM D 2240, FEP Cover properties | ||
Zugdehnung beim Bruch | 150 % | ASTM D 412 | ||
300 % | ASTM D 1708, FEP Cover properties | |||
Zugfestigkeit | 6.2 MPa | ASTM D 412 | ||
30 MPa | ASTM D 638, FEP Cover properties | |||
Thermische Eigenschaften | ||||
Einsatztemperatur | -50 – 200 °C | - | ||
200 °C | FEP Cover properties |
Freigaben
Regularium | Land | Bauteil | Bemerkungen | Gültig bis | Prüfzeugnis |
---|---|---|---|---|---|
FDA - CFR 21 - 177.2600 food a) - d) | Approvals of this compound | ||||
3-A Sanitary Standard | Approvals of this cover | ||||
ADI free and BSE/TSE/AFO free | Approvals of this cover | ||||
EC 1935/2004 article 3 | Approvals of this cover | ||||
2003/11/EC; 2006/122/EC | Approvals of this cover | ||||
EU 10/2011 | Approvals of this cover | ||||
FDA - CFR 21 - 177.1550 | Approvals of this cover | ||||
SR 817.023.21 | Approvals of this cover | ||||
USP Class VI chapter <87> (in vitro) | Approvals of this cover | ||||
USP class VI chapter <88> (in vivo) 121°C | Approvals of this cover | ||||
Free of Phtalates and Bisphenol A(BPA) | Proof of PAH and Phtalate of this cover | ||||
RoHS | in compliance | ||||
REACH | in compliance |
Hersteller
Angst+Pfister GmbH
Christian Geubert
+491779730874
Anfrage per E-Mail
Webseite | Mehr Details | Zu den Materialien von Angst+Pfister GmbH
Daten bereitgestellt von
Angst+Pfister GmbH
Christian Geubert
+491779730874
Anfrage per E-Mail
Webseite | Mehr Details | Zu den Materialien von Angst+Pfister GmbH
In compliance with RoHS and REACH directives. This information is based on our available data. These values are within the normal tolerance range of material properties and do not represent guaranteed property values. Therefore they shall not be used for specification purposes. The customer is solely responsible for quality and suitability of material for his application. He has to test usage and processing prior to use. Angst+Pfister makes no guarantees for the suitability of the material for any given application and assumes no obligation or liability in connection with the information provided above.
This information is based on our available data. These values are measured on standard test specimens and are within the normal tolerance range of material properties and do not represent guaranteed property values. Therefore they shall not be used for specification purposes. The customer is solely responsible for quality and suitability of material for his application. He has to test usage and processing prior to use. Angst+Pfister makes no guarantees for the suitability of the material for any given application and assumes no obligation or liability in connection with the information provided above.
Ähnliche Materialien
Wählen Sie die Materialeigenschaften aus, anhand derer ähnliche Materialien identifiziert werden sollen. Durch Hinzufügen weiterer Eigenschaften sowie Anpassen der jeweiligen Abweichung lässt sich die Ergebnisliste beeinflussen. Hier wird eine Auswahl der ähnlichsten Materialien angezeigt. Um die gesamte Liste zu erhalten, drücken Sie auf die Schaltfläche "Vollständige Ergebnisliste anzeigen".