novaflon® 300 (novaflon® 300)
Important properties
Physical Properties
Name | Value | Method and conditions |
---|---|---|
density | 2.1 g/cm³ | DIN 28090-2 |
specific leakage rate | < 0.015 mg/(s*m) | DIN 3535-6 |
Mechanical properties | ||
cold compression value | 3 % | DIN 28090-2 |
cold recovery | 1 % | DIN 28090-2 |
compressibility | 7 % | ASTM F 36 J |
hot creep | 20 % | 150 °C, DIN 28090-2 |
hot recovery | 3 % | DIN 28090-2, 150 °C |
recovery | 45 % | ASTM F 36 J |
residual stress | 16 N/mm² | DIN 52913, Dicke 2,00 mm / 150 °C |
tensile strength | 15 MPa | DIN 52910, quer |
Thermal properties | ||
application temperature | -210 – 260 °C | |
short-term application temperature | 260 °C |
Certificates
Regulation | Country | Part | Remark | Valid until | Certificate |
---|---|---|---|---|---|
BAM | konform | ||||
Blow-out VDI 2200 | konform | ||||
DVGW | konform | ||||
EG 1935/2004 | konform | ||||
FDA | konform | ||||
GL | konform | ||||
TA Luft | konform |
Producer
Frenzelit GmbH
+49 9273 72-0
Request via e-mail
Website | Further details | Show the materials of Frenzelit GmbH
Data Provided by
Frenzelit GmbH
+49 9273 72-0
Request via e-mail
Website | Further details | Show the materials of Frenzelit GmbH
Similar Materials
Select the material properties on the basis of which similar materials are to be identified. By adding further properties as well as adjusting the respective deviation, the result list can be influenced. A selection of the most similar materials is displayed here. To get the full list, press the "Show all results" button.