Material Hub > Materialien

Materialien

  • Abbildung des Materials 'Ti-5Al-5Mo-5V-3Cr'

    Ti-5Al-5Mo-5V-3Cr

    SLUB Dresden

    Kategorie Leichtmetalle
    Dichte 4.67  g/cm³
    Zugdehnung beim Bruch > 5  %
  • Abbildung des Materials 'Polypropylen'

    Polypropylen

    SLUB Dresden

    Kategorie Thermoplaste
    Dichte 0.9 – 0.92  g/cm³
    Zugdehnung beim Bruch 700 – 900  %
  • s-mart EPDM ((ethylene propylene diene rubber) peroxide-cured )

    seal-mart GmbH

    Kategorie Elastomere
    Dichte 1.22  g/cm³
    Zugdehnung beim Bruch > 110  %
  • s-mart FKM (fluorocarbon rubber - VITON )

    seal-mart GmbH

    Kategorie Elastomere
    Dichte 2.3  g/cm³
    Zugdehnung beim Bruch > 200  %
  • s-mart PA (polyamide)

    seal-mart GmbH

    Kategorie Thermoplaste
    Dichte 1.15  g/cm³
    Zugdehnung beim Bruch 120  %
  • s-mart PAEK (polyaryletherketone)

    seal-mart GmbH

    Kategorie Thermoplaste
    Dichte 1.32  g/cm³
    Zugdehnung beim Bruch > 50  %
  • s-mart POM (polyoxymethelene - polyacetal)

    seal-mart GmbH

    Kategorie Thermoplaste
    Dichte 1.4  g/cm³
    Zugdehnung beim Bruch 40  %
  • s-mart PTFE bronze (polytetrafluoro ethylene filled with 40% bronze)

    seal-mart GmbH

    Kategorie Thermoplaste
    Dichte 3  g/cm³
    Zugdehnung beim Bruch 280  %
  • s-mart PTFE carbon (polytetrafluoro ethylene filled with 25% carbon)

    seal-mart GmbH

    Kategorie Thermoplaste
    Dichte 2.1  g/cm³
    Zugdehnung beim Bruch 180  %
  • s-mart PTFE ekonol (polytetrafluoro ethylene filled with 10% ekonol)

    seal-mart GmbH

    Kategorie Thermoplaste
    Dichte 2.04  g/cm³
    Zugdehnung beim Bruch 250  %
  • s-mart PTFE glass (polytetrafluoro ethylene filled with 15% glassfiber, 5% MoS2)

    seal-mart GmbH

    Kategorie Thermoplaste
    Dichte 2.25  g/cm³
    Zugdehnung beim Bruch 200  %
  • s-mart PTFE graphite (polytetrafluoro ethylene filled with 15% graphite)

    seal-mart GmbH

    Kategorie Thermoplaste
    Dichte 2.13  g/cm³
    Zugdehnung beim Bruch 140  %
  • s-mart PTFE virgin (polytetrafluoro ethylene)

    seal-mart GmbH

    Kategorie Thermoplaste
    Dichte 2.17  g/cm³
    Zugdehnung beim Bruch 300  %
  • s-mart PU ((standard polyurethane) on the basis of polyester)

    seal-mart GmbH

    Kategorie Kunststoffe
    Dichte 1.2  g/cm³
    Zugdehnung beim Bruch > 430  %
  • s-mart GPU (polyurethane for giant seals and big cross sections)

    seal-mart GmbH

    Kategorie Kunststoffe
    Dichte 1.2  g/cm³
    Zugdehnung beim Bruch > 280  %
  • s-mart SPU ((self lubricated polyurethane) with lubricating agents for reduced friction applications)

    seal-mart GmbH

    Kategorie Kunststoffe
    Dichte 1.24  g/cm³
    Zugdehnung beim Bruch 380  %
  • s-mart TFE/P (tetrafluoroethylene propylene rubber - AFLAS)

    seal-mart GmbH

    Kategorie Elastomere
    Dichte 1.6  g/cm³
    Zugdehnung beim Bruch 220  %
  • s-mart XHPU (hard hydrolysis resistant polyurethane)

    seal-mart GmbH

    Kategorie Kunststoffe
    Dichte 1.22  g/cm³
    Zugdehnung beim Bruch 350  %
  • s-mart XPU (hard polyurethane)

    seal-mart GmbH

    Kategorie Kunststoffe
    Dichte 1.21  g/cm³
    Zugdehnung beim Bruch 400  %
  • s-mart XSPU (hard self-lubricated polyurethane)

    seal-mart GmbH

    Kategorie Kunststoffe
    Dichte 1.25  g/cm³
    Zugdehnung beim Bruch 350  %

Daten bereitgestellt von

  1. seal-mart GmbH
  2. SLUB Dresden
  3. Key to Metals AG 1000
  4. Röchling Engineering Plastics SE & Co. KG 354
  5. Kahmann & Ellerbrock 99
  6. Victrex plc 75
  7. Mitsubishi Chemical Advanced Materials 67
  8. Rhenotherm Kunststoffbeschichtungs GmbH 57
  9. Zeige 18 weitere
Feedback

Geben Sie uns gern Feedback zum Material Hub.

Kontaktformular

Fragebogen zur Gebrauchstauglichkeit

QR Code