Material Hub > Materialien

Röchling Engineering Plastics SE & Co. KG (Datenlieferant)

Trovidur® PVC-U

Very good chemical resistance, Flame retardant, self-extinguishing after removal of flame, High rigidity, Very good electrical insulation properties, High resistance to acids, lyes and salt solutions, Easy processing by welding, thermoforming and glueing, Excellent printability

Symbolbild

Anwendungsgebiete Chemical engineering and tank building; Electrical industry; Construction industry

Physikalische Eigenschaften

Name Wert Messverfahren und -bedingungen
Dichte 1.45 g/cm³ DIN EN ISO 1183-1
Mechanische Eigenschaften
 
Schlagzähigkeit 2 kJ/m² DIN EN ISO 179
Shore-Härte (D) 79 Shore D DIN EN ISO 868
Streckspannung 45 MPa DIN EN ISO 527
Zug-Elastizitätsmodul 3000 MPa DIN EN ISO 527
Zugdehnung beim Bruch 15 % DIN EN ISO 527
Elektrische und magnetische Eigenschaften
 
absolute Permittivität 3 F/m IEC 60250
dielektrischer Verlustfaktor 0.02 IEC 60250, 10^6 Hz
Durchgangswiderstand 1.0E+15 Ωcm DIN EN 62631-3-1
Oberflächenwiderstand 10000000000000 Ω DIN EN 62631-3-2
Thermische Eigenschaften
 
Einsatztemperatur 0 – 60 °C
Einsatztemperatur, kurzzeitig < 70 °C
linearer Längenausdehnungskoeffizient 80 10⁻⁶/K DIN 53752
Wärmeleitfähigkeit 0.2 W/(K*m) DIN 52612-1

Chemische Eigenschaften

Name Wert Messverfahren und -bedingungen
Brennverhalten V0 / V0 UL 94, Dicke: 3 mm / 6 mm

Hersteller

Daten bereitgestellt von

Haftungsausschluss

The short-term maximum application temperature only applies to very low mechanical stress for a few hours. The long-term maximum application temperature is based on the thermal ageing of plastics by oxidation, resulting in a decrease of the mechanical properties. This applies to an exposure to temperatures for at least 5.000 hours causing a 50% loss of the tensile strength from the original value (measured at room temperature). This value says nothing about the mechanical strength of the material at high application temperatures. In case of thick-walled parts, only the surface layer is affected by oxidation from high temperatures. With the addition of antioxidants, a better protection of the surface layer is achieved. In any case, the center area of the material remains unaffected. The minimum application temperature is basically influenced by possible stress factors like impact and/or shock under application. The values stated refer to an minimum degree of impact stress. The electrical properties as stated result from measurements on natural, dry material. With other colours (in particular black) or saturated material, there may be clear differences in the electrical properties. The data stated above are average values ascertained by statistical tests on a regular basis. They are in accordance with DIN EN 15860. They serve as information about our products and are presented as a guide to choose from our range of materials. This, however, does not include an assurance of specific properties or the suitability for particular application purposes that are legally binding. Since the properties also depend on the dimension of the semi-finished products and the degree of crystallization (e.g. nucleating by pigments), the actual values of the properties of a particular product may differ from the indicated values.

Ähnliche Materialien

Wählen Sie die Materialeigenschaften aus, anhand derer ähnliche Materialien identifiziert werden sollen. Durch Hinzufügen weiterer Eigenschaften sowie Anpassen der jeweiligen Abweichung lässt sich die Ergebnisliste beeinflussen. Hier wird eine Auswahl der ähnlichsten Materialien angezeigt. Um die gesamte Liste zu erhalten, drücken Sie auf die Schaltfläche "Vollständige Ergebnisliste anzeigen".

5%

Letzte Aktualisierung: 16.11.2020
Feedback

Geben Sie uns gern Feedback zum Material Hub.

Kontaktformular

Fragebogen zur Gebrauchstauglichkeit

QR Code