Key to Metals AG (Datenlieferant)

Aluminium 356 (SAE)

Symbolbild

Kategorie Metalle > Nichteisenmetalle > Leichtmetalle > Aluminium

Einsatzbeispiele

For intricate castings requiring good strength and ductility.
These castings have been used typically for components requiring low strength at room temperature, but usage is not limited to such applications.
These castings have been used typically for components requiring low weight, moderate strength and soundness, cast to approximately final dimensions, but usage is not limited to such applications.
These castings have been used typically for components requiring low weight, moderate strength, and soundness, but usage is not limited to such applications.
These castings have been used typically for components requiring moderate strength up to 450°F (230°C), but usage is not limited to such applications.
These castings have been used typically for intricate castings with thin walls or sections used at relatively high stresses, but usage is not limited to such applications.
These castings have been used typically for small, intricate parts cast to approximately final dimensions, but usage is not limited to such applications.

Physikalische Eigenschaften

Name	Wert	Messverfahren und -bedingungen
Dichte	2.685 kg/dm³
Mechanische Eigenschaften

0,2-%-Streckgrenze bei Zugbeanspruchung	> 83 MPa
Schubmodul	26 GPa
Zug-Elastizitätsmodul	71 GPa
Zugdehnung beim Bruch	> 0.7 %
Zugfestigkeit	> 121 MPa
Elektrische und magnetische Eigenschaften

spezifischer elektrischer Widerstand	0.04 – 0.044 Ω∙mm²/m
Thermische Eigenschaften

Wärmeleitfähigkeit	151 – 167 W/(m∙°C)

Key to Metals AG

IBDT Ingenieurbüro Daniel Trost
+49 176 703 22 119
Anfrage per E-Mail