Key to Metals AG (Datenlieferant)

17-7PH (SAE)

Symbolbild

Kategorie Metalle > Eisenmetalle > Stähle

Einsatzbeispiele

Primarily for parts requiring corrosion resistance and high strength up to 600°F (315°C), and when such parts may require welding during fabrication.
These products have been used typically for parts requiring corrosion resistance and high strength up to 316°C (600°F), and where such parts may require welding during fabrication, but usage is not limited to such applications.
These products have been used typically for parts such as springs requiring corrosion resistance and high strength up to 316°C (600°F), but usage is not limited to such applications.
This tubing has been used typically for parts requiring corrosion resistance and high strength up to 316°C (600°F) after precipitation heat treatment, but usage is not limited to such applications.
Used typically for springs requiring corrosion resistance and resistance to permanent set up to 316°C (600°F), but usage is not limited to such applications. Where parts require welding during fabrication, strength of this cold-drawn wire will be impaired.

Physikalische Eigenschaften

Name	Wert	Messverfahren und -bedingungen
Dichte	7.64 – 7.806 kg/dm³
Mechanische Eigenschaften

0,2-%-Streckgrenze bei Zugbeanspruchung	> 379 MPa
Schlagenergie	36.4 – 37.8 J
Schubmodul	79 GPa
Zug-Elastizitätsmodul	200 GPa
Zugdehnung beim Bruch	1 – 11.9 %
Zugfestigkeit	1034 – 2572 MPa
Elektrische und magnetische Eigenschaften

spezifischer elektrischer Widerstand	0.8 – 0.838 Ω∙mm²/m

Key to Metals AG

IBDT Ingenieurbüro Daniel Trost
+49 176 703 22 119
Anfrage per E-Mail