Material Hub > Materialien

Angst+Pfister GmbH (Datenlieferant)

VMQ 70.10-01 (Vinyl methyl silicone elastomer)

Silicone elastomer with good mechanical properties over a wide temperature range. Not to be used in contact with steam.

Symbolbild

Farbe red-brown
alternative Namen
  • Abkürzung: VMQ

Physikalische Eigenschaften

Name Wert Sollbereich Bemerkung Messverfahren und -bedingungen
Dichte 1.35 g/cm³ 1.32 – 1.38 g/cm³ DIN 53479
Gewichtsänderung 4 % DIN 53521, Medium: IRM 901 Oil (ASTM 1); 70 h, 150 °C
4 % DIN 53521, Medium: IRM 902 Oil (ASTM 2); 22 h, 100 °C
7 % DIN 53521, Medium: IRM 902 Oil (ASTM 2); 72 h, 150 °C
25 % DIN 53521, Medium: IRM 903 Oil (ASTM 3); 70 h, 150 °C
Änderung des Volumens 6 % DIN 53521, Medium: IRM 901 Oil (ASTM 1); 70 h, 150 °C
7 % DIN 53521, Medium: IRM 902 Oil (ASTM 2); 22 h, 100 °C
10 % DIN 53521, Medium: IRM 902 Oil (ASTM 2); 72 h, 150 °C
32 % DIN 53521, Medium: IRM 903 Oil (ASTM 3); 70 h, 150 °C
Mechanische Eigenschaften
 
Druckverformungsrest 20 % DIN 53517-B, 22 h, 175 °C
18 % DIN 53517-B, 70 h, 100 °C
Shore-Härte (A) 70 Shore A 65 – 75 Shore A DIN 53505
Weiterreißwiderstand 17 N/mm ASTM D 624-B
Zugdehnung beim Bruch 180 % DIN 53504-S2
Zugfestigkeit 7.5 MPa DIN 53504-S2
Änderung der Härte 3 Points DIN 53508, Air aging; 72 h, 200 °C
3 Points DIN 53508, Air aging; 70 h, 225 °C
-3 Points DIN 53521, Medium: IRM 901 Oil (ASTM 1); 70 h, 150 °C
-5 Points DIN 53521, Medium: IRM 902 Oil (ASTM 2); 22 h, 100 °C
-8 Points DIN 53521, Medium: IRM 902 Oil (ASTM 2); 72 h, 150 °C
-20 Points DIN 53521, Medium: IRM 903 Oil (ASTM 3); 70 h, 150 °C
Änderung der Zugdehnung beim Bruch -30 % DIN 53508, Air aging; 72 h, 200 °C
-28 % DIN 53508, Air aging; 70 h, 225 °C
-15 % DIN 53521, Medium: IRM 901 Oil (ASTM 1); 70 h, 150 °C
-10 % DIN 53521, Medium: IRM 902 Oil (ASTM 2); 22 h, 100 °C
-12 % DIN 53521, Medium: IRM 902 Oil (ASTM 2); 72 h, 150 °C
-20 % DIN 53521, Medium: IRM 903 Oil (ASTM 3); 70 h, 150 °C
Änderung Zugfestigkeit -20 % DIN 53508, Air aging; 72 h, 200 °C
-20 % DIN 53508, Air aging; 70 h, 225 °C
-10 % DIN 53521, Medium: IRM 901 Oil (ASTM 1); 70 h, 150 °C
-8 % DIN 53521, Medium: IRM 902 Oil (ASTM 2); 22 h, 100 °C
-10 % DIN 53521, Medium: IRM 902 Oil (ASTM 2); 72 h, 150 °C
-13 % DIN 53521, Medium: IRM 903 Oil (ASTM 3); 70 h, 150 °C
Thermische Eigenschaften
 
Einsatztemperatur -55 – 200 °C approximate value, dependent of the application
Einsatztemperatur, kurzzeitig < 230 °C approximate value, dependent of the application
Kältesprödigkeitstemperatur bei Schlagbeanspruchung -72 °C UNI 7320/91
TR10 -42 °C UNI 7897/89

Chemische Eigenschaften

Name Wert Messverfahren und -bedingungen
Vernetzungsart peroxid

Freigaben

Regularium Land Bauteil Bemerkungen Gültig bis Prüfzeugnis
3-A Sanitary Standard Number 18-03 Class III konform
ADI free konform
BfR XV (Silicone) konform
D.M. 21/03/1973 (Migration test only) konform
Dlgs. 25.01.1992 n.108 Art.2 Parte D konform
DVGW EN 549 D2 H3 -20 to 125 °C konform
EC 1935/2004 (excl. article 15) konform
FDA - CFR 21 - 177.2600 food a) - f) konform
French Arrete 25/11/1992 konform
GB 4806.11-2016 konform
LFGB 30/31 konform
SR 817.023.21 konform
USP Class VI chapter <87> (in vitro) konform
USP Class VI chapter <88> (in vivo) 121 °C konform
PAH Category 1 (AfPS GS 2019:01) konform
Phthalate free konform
RoHS konform
REACH

Hersteller

Angst+Pfister GmbH

Daten bereitgestellt von

Angst+Pfister GmbH

Haftungsausschluss

In compliance with RoHS and REACH directives. This information is based on our available data. These values are measured on standard test specimens and are within the normal tolerance range of material properties and do not represent guaranteed property values. Therefore they shall not be used for specification purposes. The customer is solely responsible for quality and suitability of material for his application. He has to test usage and processing prior to use. Angst+Pfister makes no guarantees for the suitability of the material for any given application and assumes no obligation or liability in connection with the information provided above.

This information is based on our available data. These values are measured on standard test specimens and are within the normal tolerance range of material properties and do not represent guaranteed property values. Therefore they shall not be used for specification purposes. The customer is solely responsible for quality and suitability of material for his application. He has to test usage and processing prior to use. Angst+Pfister makes no guarantees for the suitability of the material for any given application and assumes no obligation or liability in connection with the information provided above.

Ähnliche Materialien

Wählen Sie die Materialeigenschaften aus, anhand derer ähnliche Materialien identifiziert werden sollen. Durch Hinzufügen weiterer Eigenschaften sowie Anpassen der jeweiligen Abweichung lässt sich die Ergebnisliste beeinflussen. Hier wird eine Auswahl der ähnlichsten Materialien angezeigt. Um die gesamte Liste zu erhalten, drücken Sie auf die Schaltfläche "Vollständige Ergebnisliste anzeigen".

5%

Letzte Aktualisierung: 03.05.2023
Feedback

Geben Sie uns gern Feedback zum Material Hub.

Kontaktformular

Fragebogen zur Gebrauchstauglichkeit

QR Code