Maywoflamm® ABS 1651
symbolic image
Physical Properties
| Name | Value | Method and conditions |
|---|---|---|
| density | 1.22 g/cm³ | DIN EN ISO 1183-1 |
| Mechanical properties | ||
| ball indentation hardness | 81 MPa | DIN EN ISO 2039-1, H358/30 |
| impact strength | 20 kJ/m² | DIN EN ISO 179 |
| tensile modulus of elasticity | 1700 MPa | DIN EN ISO 527 |
| tensile strain at break | 28 % | DIN EN ISO 527 |
| tensile stress at yield | 40 MPa | DIN EN ISO 527 |
| Electrical and magnetic properties | ||
| dielectric strength | 20 kV/mm | IEC 60243, Dielectric strength |
| surface resistance | > 1000000000000 Ω | DIN EN 61340 |
| volume resistance | > 1000000000000 Ω | DIN EN 61340 |
| Thermal properties | ||
| application temperature | 70 °C | |
| coefficient of linear thermal expansion | 90 10⁻⁶/K | DIN 53752 |
| short-term application temperature | < 80 °C | |
| thermal conductivity | 0.2 W/(K*m) | DIN 52612-1 |
| vicat softening temperature | 79 °C | DIN EN ISO 306, Vicat B |
Chemical Properties
| Name | Value | Method and conditions |
|---|---|---|
| flammability | V0 | UL 94, Dicke: 2,1 mm |
Producer
Röchling Maywo GmbH
+49 8334 9857-0
Request via e-mail
Website | Further details | Show the materials of Röchling Maywo GmbH
Data Provided by
Röchling Engineering Plastics SE & Co. KG
The information and recommendations contained in this document are based upon data collected by Röchling Maywo and believed to be correct. However, no warranty of fitness for use or any other guarantees or warranty of any kind, expressed or implied, is made to the information contained herein, and Röchling Maywo assumes no responisbility for the results of the use of products and processes described herein.
Similar Materials
Select the material properties on the basis of which similar materials are to be identified. By adding further properties as well as adjusting the respective deviation, the result list can be influenced. A selection of the most similar materials is displayed here. To get the full list, press the "Show all results" button.
