Röchling Engineering Plastics SE & Co. KG (data deliverer)
Matrox®
Extremely low coefficient of friction, Very good abrasion and wear resistance, High temperature resistance, High impact strength, High chemical and corrosion resistance, Nearly no moisture absorption
symbolic image
application area
Lining technology; Environment and disposal technology
Beschichtung; Umwelttechnik
Physical Properties
| Name | Value | Remark | Method and conditions |
|---|---|---|---|
| density | 0.93 g/cm³ | DIN EN ISO 1183-1 | |
| water absorption | < 0.01 % | DIN EN ISO 62 | |
| Mechanical properties | |||
| abrasion | 80 µm/km | Sand-slurry | |
| impact strength | ohne Bruch | DIN EN ISO 179 | |
| Shore hardness (type D) | 63 Shore D | DIN EN ISO 868 | |
| tensile modulus of elasticity | 670 MPa | DIN EN ISO 527 | |
| tensile strain at break | > 200 % | DIN EN ISO 527 | |
| tensile stress at yield | 20 MPa | DIN EN ISO 527 | |
| Electrical and magnetic properties | |||
| absolute permittivity | 2.3 F/m | IEC 60250 | |
| dielectric dissipation factor | 0.0001 | IEC 60250, 10^6 Hz | |
| dielectric strength | 45 kV/mm | IEC 60243, Dielectric strength | |
| electrical tracking resistance | 600 V | IEC 60112 | |
| surface resistance | > 1.0E+14 Ω | DIN EN 62631-3-2 | |
| volume resistance | > 1.0E+14 Ωcm | DIN EN 62631-3-1 | |
| Thermal properties | |||
| application temperature | -250 – 80 °C | ||
| coefficient of linear thermal expansion | 150 – 230 10⁻⁶/K | DIN 53752 | |
| melting temperature | 135 °C | ISO 11357-3 | |
| short-term application temperature | < 130 °C | ||
| specific heat capacity | 1.9 kJ/(kg*K) | DIN 52612 | |
| thermal conductivity | 0.4 W/(K*m) | DIN 52612-1 | |
| vicat softening temperature | 79 °C | DIN EN ISO 306, Vicat B | |
Chemical Properties
| Name | Value | Method and conditions |
|---|---|---|
| flammability | HB | UL 94, Dicke: 3 mm / 6 mm |
Data Provided by
Röchling Engineering Plastics SE & Co. KG
disclaimer
The data stated above are average values ascertained by statistical tests on a regular basis. They are in accordance with DIN EN 15860. The data above are provided purely for information and shall not be regarded as binding unless expressly agreed in a contract of sale.
Similar Materials
Select the material properties on the basis of which similar materials are to be identified. By adding further properties as well as adjusting the respective deviation, the result list can be influenced. A selection of the most similar materials is displayed here. To get the full list, press the "Show all results" button.
