TIVAR® 1000 antistatic
symbolic image
- descriptive name: PE-UHMW + carbon black
Physical Properties
Name | Value | Nominal range | Remark | Method and conditions |
---|---|---|---|---|
density | 0.935 g/cm³ | |||
moisture absorption | < 0.1 % | |||
water absorption | < 0.1 % | |||
Mechanical properties | ||||
abrasion | 105 | Sand Slurry Test | ||
8 µm/m*K | k-Factor | |||
ball indentation hardness | 34 MPa | |||
coefficient of dynamic friction | 0.15 | < 0.3 | ||
compressive strength | 7 MPa | 1 % | ||
11 MPa | 2 % | |||
17.5 MPa | 5 % | |||
flexural strength | 18 MPa | |||
impact strength | ohne Bruch | Charpy, ungekerbt | ||
110 kJ/m² | Teilbruch | Charpy, gekerbt | ||
Shore hardness (type D) | 61 Shore D | |||
tensile modulus of elasticity | 790 MPa | |||
tensile strain at break | < 50 % | |||
tensile strain at yield | 15 % | |||
tensile stress at yield | 20 MPa | |||
Electrical and magnetic properties | ||||
surface resistance | < 100000000 Ω | |||
Thermal properties | ||||
application temperature | < 80 °C | 20000 h | ||
< NaN °C | 5000 h | |||
coefficient of linear thermal expansion | 0.0002 µm/m*K | 23 - 100° C | ||
heat deflection temperature | 42 °C | 1,8 MPa | ||
melting temperature | 135 °C | |||
thermal conductivity | 0.4 W/(K*m) |
Chemical Properties
Name | Value | Method and conditions |
---|---|---|
chemical resistance | Acids, Weak: vertretbar | |
Acids, Strong (pH 1-3): vertretbar | ||
Alkalies, Weak: vertretbar | ||
Alkalies, Strong (pH 11-14): vertretbar | ||
Hydrocarbons - Aromatic: beschränkt | ||
Hydrocarbons - Aliphatic: vertretbar | ||
Ketones, Esters: vertretbar | ||
Chlorinated Solvents: vertretbar | ||
Alcohols: vertretbar | ||
Continuous Sunlight: beschränkt | ||
Inorganic Salt Solutions: vertretbar | ||
Hot Water / Steam: nicht vertretbar | ||
flammability | HB | UL94 |
oxygen index | < 20 % |
Certificates
Regulation | Country | Part | Remark | Valid until | Certificate |
---|---|---|---|---|---|
FDA | nicht konform | ||||
European Food 1935/2004 | konform | ||||
3A-Dairy | nicht konform | ||||
USP Class VI | nicht konform |
Producer
Mitsubishi Chemical Advanced Materials
+49 (0) 7261 155 0
Request via e-mail
Website | Further details | Show the materials of Mitsubishi Chemical Advanced Materials
Data Provided by
Mitsubishi Chemical Advanced Materials
+49 (0) 7261 155 0
Request via e-mail
Website | Further details | Show the materials of Mitsubishi Chemical Advanced Materials
Similar Materials
Select the material properties on the basis of which similar materials are to be identified. By adding further properties as well as adjusting the respective deviation, the result list can be influenced. A selection of the most similar materials is displayed here. To get the full list, press the "Show all results" button.