Ketron® GF30 PEEK
symbolic image
- descriptive name: PEEK + glassfibres, extruded
Physical Properties
| Name | Value | Nominal range | Method and conditions |
|---|---|---|---|
| density | 1.51 g/cm³ | ||
| moisture absorption | 0.16 % | ||
| water absorption | 0.35 % | ||
| Mechanical properties | |||
| abrasion | 7 µm/m*K | k-Factor | |
| ball indentation hardness | 250 MPa | ||
| coefficient of dynamic friction | 0.3 | < 0.45 | |
| compressive strength | 54 MPa | 1 % | |
| 103 MPa | 2 % | ||
| 155 MPa | 5 % | ||
| flexural strength | 155 MPa | ||
| impact strength | 25 kJ/m² | Charpy, ungekerbt | |
| 3 kJ/m² | Charpy, gekerbt | ||
| Rockwell hardness (M) | 100 HRM | ||
| Shore hardness (type D) | 87 Shore D | ||
| tensile modulus of elasticity | 7000 MPa | ||
| tensile strain at yield | 3.5 % | ||
| tensile stress at yield | 80 MPa | ||
| Electrical and magnetic properties | |||
| absolute permittivity | 3.2 F/m | 100 Hz | |
| dielectric dissipation factor | 0.001 | 100 Hz | |
| dielectric strength | 24 kV/mm | ||
| electrical tracking resistance | 175 V | ||
| surface resistance | > 10000000000000 Ω | ||
| volume resistance | > 1.0E+14 Ω | ||
| Thermal properties | |||
| application temperature | < 250 °C | 20000 h | |
| < NaN °C | 5000 h | ||
| coefficient of linear thermal expansion | 3.0E-5 µm/m*K | 23 - 100° C | |
| heat deflection temperature | 230 °C | 1,8 MPa | |
| melting temperature | 340 °C | ||
| thermal conductivity | 0.43 W/(K*m) | ||
Chemical Properties
| Name | Value | Method and conditions |
|---|---|---|
| chemical resistance | Acids, Weak: vertretbar | |
| Acids, Strong (pH 1-3): beschränkt | ||
| Alkalies, Weak: vertretbar | ||
| Alkalies, Strong (pH 11-14): vertretbar | ||
| Hydrocarbons - Aromatic: vertretbar | ||
| Hydrocarbons - Aliphatic: vertretbar | ||
| Ketones, Esters: vertretbar | ||
| Chlorinated Solvents: vertretbar | ||
| Alcohols: vertretbar | ||
| Continuous Sunlight: beschränkt | ||
| Inorganic Salt Solutions: vertretbar | ||
| Hot Water / Steam: vertretbar | ||
| flammability | V-0 | UL94 |
| oxygen index | 40 % |
Certificates
| Regulation | Country | Part | Remark | Valid until | Certificate |
|---|---|---|---|---|---|
| FDA | nicht konform | ||||
| European Food 1935/2004 | nicht konform | ||||
| 3A-Dairy | nicht konform | ||||
| USP Class VI | nicht konform |
Producer
Mitsubishi Chemical Advanced Materials
+49 (0) 7261 155 0
Request via e-mail
Website | Further details | Show the materials of Mitsubishi Chemical Advanced Materials
Data Provided by
Mitsubishi Chemical Advanced Materials
+49 (0) 7261 155 0
Request via e-mail
Website | Further details | Show the materials of Mitsubishi Chemical Advanced Materials
Similar Materials
Select the material properties on the basis of which similar materials are to be identified. By adding further properties as well as adjusting the respective deviation, the result list can be influenced. A selection of the most similar materials is displayed here. To get the full list, press the "Show all results" button.
