Fluorosint® MT-01
symbolic image
- descriptive name: PTFE + additives, enhanced grade, compression moulded
Physical Properties
| Name | Value | Nominal range | Method and conditions |
|---|---|---|---|
| density | 2.27 g/cm³ | ||
| water absorption | 1.5 – 2.5 % | ||
| Mechanical properties | |||
| abrasion | 6 µm/m*K | k-Factor | |
| ball indentation hardness | 55 MPa | ||
| coefficient of dynamic friction | 0.15 | < 0.25 | |
| compressive strength | 11 MPa | 1 % | |
| 17 MPa | 2 % | ||
| 29 MPa | 5 % | ||
| flexural strength | 20 MPa | ||
| impact strength | 20 kJ/m² | Charpy, ungekerbt | |
| 4 kJ/m² | Charpy, gekerbt | ||
| Rockwell hardness (R) | 74 HRR | ||
| Shore hardness (type D) | 70 Shore D | ||
| tensile modulus of elasticity | 1900 MPa | ||
| tensile strain at break | 20 % | ||
| tensile strain at yield | 6 % | ||
| tensile stress at yield | 14 MPa | ||
| Electrical and magnetic properties | |||
| surface resistance | < 100000 Ω | ||
| Thermal properties | |||
| application temperature | < 260 °C | 20000 h | |
| < NaN °C | 5000 h | ||
| coefficient of linear thermal expansion | 6.0E-5 µm/m*K | 23 - 100° C | |
| heat deflection temperature | 95 °C | 1,8 MPa | |
| melting temperature | 327 °C | ||
Chemical Properties
| Name | Value | Method and conditions |
|---|---|---|
| chemical resistance | Acids, Weak: vertretbar | |
| Acids, Strong (pH 1-3): vertretbar | ||
| Alkalies, Weak: vertretbar | ||
| Alkalies, Strong (pH 11-14): nicht vertretbar | ||
| Hydrocarbons - Aromatic: vertretbar | ||
| Hydrocarbons - Aliphatic: vertretbar | ||
| Ketones, Esters: vertretbar | ||
| Chlorinated Solvents: vertretbar | ||
| Alcohols: vertretbar | ||
| Continuous Sunlight: vertretbar | ||
| Inorganic Salt Solutions: vertretbar | ||
| Hot Water / Steam: beschränkt | ||
| flammability | V-0 | UL94 |
| oxygen index | > 95 % |
Certificates
| Regulation | Country | Part | Remark | Valid until | Certificate |
|---|---|---|---|---|---|
| FDA | nicht konform | ||||
| European Food 1935/2004 | nicht konform | ||||
| 3A-Dairy | nicht konform | ||||
| USP Class VI | nicht konform |
Producer
Mitsubishi Chemical Advanced Materials
+49 (0) 7261 155 0
Request via e-mail
Website | Further details | Show the materials of Mitsubishi Chemical Advanced Materials
Data Provided by
Mitsubishi Chemical Advanced Materials
+49 (0) 7261 155 0
Request via e-mail
Website | Further details | Show the materials of Mitsubishi Chemical Advanced Materials
Similar Materials
Select the material properties on the basis of which similar materials are to be identified. By adding further properties as well as adjusting the respective deviation, the result list can be influenced. A selection of the most similar materials is displayed here. To get the full list, press the "Show all results" button.
