X 20 CrMoV 12 1 (DIN)
Further informationen can be found here.
symbolic image
- Application limits<br />Quality grades I: Tubes with OD ≤ 63.5 mm are for temperature of conveyed fluid ≤ 450°C and permissible working pressure p ≤ 80 bar; Tubes with OD > 63.5 mm are for temperature of conveyed fluid ≤ 450°C and permissible working pressure p ≤ 32 bar<br />Quality grades III: Tubes with OD ≤ 63.5 mm are for temperature of conveyed fluid > 450°C and permissible working pressure p > 80 bar; Tubes with OD > 63.5 mm are for temperature of conveyed fluid > 450°C and permissible working pressure p > 32 bar.<br />Used in the construction of boilers, pipelines, pressure vessels and equipment for service up to 600°C and at simultaneous high pressures, where the total stress and the relevant scaling conditions can raise or lower the temperature limit.
- Mainly intended for use in chemical plants for high pressure applications at service temperatures of 200°C or more and simultaneous exposure to hydrogen (e.g. boiler or heat exchanger tubes).
Physical Properties
Name | Value | Method and conditions |
---|---|---|
density | 7.76 kg/dm³ | |
Mechanical properties | ||
impact energy | > 24 J | |
tensile strain at break | > 14 % | |
tensile strength | 690 – 850 MPa | |
yield strength 0,2 % | > 490 MPa | |
Electrical and magnetic properties | ||
specific electrical resistance | 0.603 Ω∙mm²/m | |
Thermal properties | ||
specific heat capacity | 439 J/(kg∙°C) | |
thermal conductivity | 24 W/(m∙°C) |
Data Provided by
Key to Metals AG
IBDT Ingenieurbüro Daniel Trost
+49 176 703 22 119
Request via e-mail
Website | Further details | Show the materials of Key to Metals AG
Similar Materials
Select the material properties on the basis of which similar materials are to be identified. By adding further properties as well as adjusting the respective deviation, the result list can be influenced. A selection of the most similar materials is displayed here. To get the full list, press the "Show all results" button.