Key to Metals AG (data deliverer)
17-4PH (SAE)
Further informationen can be found here.
symbolic image
use cases
- These products have been used typically for parts requiring corrosion resistance and high strength up to 316°C (600°F) and where such parts may require welding during fabrication, but usage is not limited to such applications.
- These products have been used typically for parts requiring corrosion resistance and high strength up to 316°C (600°F) but usage is not limited to such applications.
- These products have been used typically for parts requiring corrosion resistance and high strength up to 316°C (600°F), but usage is not limited to such applications.
- These products have been used typically for parts requiring corrosion resistance and high strength up to 600°F (316°C) with good ductility and strength in the transverse direction in large section sizes, but usage is not limited to such applications.
- Typically used for parts requiring corrosion resistance and high strength up to 316°C (600°F) but usage is not limited to such applications.
- Typically used for parts requiring corrosion resistance and high strength up to 316°C (600°F).
- Used typically for parts requiring corrosion resistance and high strength up to 316°C (600°F), but usage is not limited to such applications.
- Used typically for parts requiring good corrosion resistance and strength up to 316°C (600°F), but usage is not limited to such applications.
Physical Properties
| Name | Value | Method and conditions |
|---|---|---|
| density | 7.75 – 7.861 kg/dm³ | |
| Mechanical properties | ||
| impact energy | > 25 J | |
| shear modulus | 77 – 88 GPa | |
| tensile modulus of elasticity | 196.5 – 204.2 GPa | |
| tensile strain at break | 3 – 16 % | |
| tensile strength | 861.8 – 1552 MPa | |
| yield strength 0,2 % | 689.5 – 1236.6 MPa | |
| Electrical and magnetic properties | ||
| specific electrical resistance | 0.77 – 1.001 Ω∙mm²/m | |
| Thermal properties | ||
| specific heat capacity | 438.93 J/(kg∙°C) | |
| thermal conductivity | 15.2 W/(m∙°C) | |
Data Provided by
Key to Metals AG
IBDT Ingenieurbüro Daniel Trost
+49 176 703 22 119
Request via e-mail
Website | Further details | Show the materials of Key to Metals AG
Similar Materials
Select the material properties on the basis of which similar materials are to be identified. By adding further properties as well as adjusting the respective deviation, the result list can be influenced. A selection of the most similar materials is displayed here. To get the full list, press the "Show all results" button.
