Key to Metals AG (data deliverer)
1010 (SAE)
Further informationen can be found here.
symbolic image
use cases
- Flat Rolled Products applies to Structural Shapes, Plates, Strips, Sheets and Welded Tubing; Long Products applies to Semi-Finished Products for Forging, Hot Rolled and Cold Finished Bars, Wire Rods and Seamless Tubing.
- Hot-rolled carbon steel bars and heat treated carbon steel bars which are to be used in cold shaping, including cold extrusion, of ammunition components.
- Low-carbon steel in the form of welded tubing, used typically for oil lines and other parts requiring high-quality tubing suitable for severe forming and for welding or brazing.
- These products have been used typically for deep-drawn and formed parts requiring a steel of high ductility and where parts may require welding during fabrication, but usage is not limited to such applications.
- These products have been used typically for drawn and formed parts requiring a steel of moderate ductility, but usage is not limited to such applications.
- These products have been used typically for stamped parts and for parts requiring bending only normal to the direction of rolling, but usage is not limited to such applications.
- Used in automobile panels, appliances and so on.
- Used typically for deep drawn and formed parts requiring a steel of high ductility, but usage is not limited to such applications.
- Used typically for oil lines and other parts requiring high-quality tubing suitable for severe forming and for welding or brazing, but usage is not limited to such applications.
Bauwesen; Fahrzeugbau; Öl und Gas; Rollen; Textilindustrie
Physical Properties
| Name | Value | Method and conditions |
|---|---|---|
| Mechanical properties | ||
| tensile strain at break | > 20 % | |
| tensile strength | 320 – 653.3 MPa | |
| yield strength 0,2 % | > 180 MPa | |
Data Provided by
Key to Metals AG
IBDT Ingenieurbüro Daniel Trost
+49 176 703 22 119
Request via e-mail
Website | Further details | Show the materials of Key to Metals AG
Similar Materials
Select the material properties on the basis of which similar materials are to be identified. By adding further properties as well as adjusting the respective deviation, the result list can be influenced. A selection of the most similar materials is displayed here. To get the full list, press the "Show all results" button.
